Screwplates

[EricFG]

I get two translations:
""The first type - silver from ОВ with a two-level flange on a photo №5: ОВ2, approximately, to 300 тыс, ОВ1, approximately, to 120 thousand

The second type - medno-nickel with серебрянным a two-level flange, on скане №1: on ОВ2, approximately, to 650 тыс, but with mutual overlapping of type 3 ОВ1 from 120 тыс to, approximately, 180тыс.

The third type - medno-nickel (cupronickel) with a usual flange on a photo №2,3: ОВ2 about 650 thousand to №927тыс., ОВ1 from 180 thousand on 220 thousand

The fourth type - медноникель with цельноштампованной a carving of a photo №4 ОВ1 with №220тыс on 315тыс (it is still characteristic for late releases of 45 КЗ).

And the fifth, медноникель (German silver) with цельноштампованным an one-stage flange on ОВ2 from ³928 thousand and on all releases of 1985, on a photo №6."

Plus, is such - nuts under №1 - such put only on OV-2 ЛМД, a nut under №4 - only КЗ."
----------------------------------- or --------------------------

"The first type - silver from agents with two-flange on the photo number 5: OB2, approximately 300 thousand, OB1, approximately 120 thousand

The second type - copper-nickel-silver two-step flange on the scan number 1: OB2 to approximately 650 thousand, but with overlap of type 3 OB1 from 120 thousand to about 180tys.

The third type - copper-nickel (cupro-nickel) with a conventional flange on the photo № 2,3: OB2 with approximately 650 thousand to № 927tys., OB1 from 180 thousand to 220 thousand

The fourth type - from a single piece threaded mednonikel photo № № 4 OB1 with 220tys on 315tys (another characteristic of the later editions '45 CC).

And fifth, mednonikel (nickel silver) with a single-stage single piece flange on OB2 number with 928 thousand and all issues in 1985, the photo number 6. "

Plus, there is - the nuts under the number 1 - are placed only on the RH-2 LMD, the nut under the number 4 - only fault."

Neither of which make much sense.