Fixing a visor hat

HuliganRS · 08-22-2011, 06:34 PM

I just received a hat from across the pond and the hat is deformed as well as the stitching is missing on one of the sides of the visor.

Any suggestions as to how it can be fixed?

Thank you,

Rusty

Jeffrey Meffert · 08-22-2011, 06:35 PM

Picture?

HuliganRS · 08-22-2011, 07:05 PM

Quote:

Originally Posted by Jeffrey Meffert

Picture?

Here you go:

Tretov · 08-22-2011, 06:38 PM

If this is a cheap 1980s EM visor, you can glue the visor back in place. If not, you could re-stitch using a thin needle and re-sew using the small holes that used to hold the visor, and add some glue if needed. Depends on the cap.

To restore the circular shape of the base, place it onto a upside-down bowl or even better a mannequin head. Then leave it like that for a while.

Complain to the seller and ask for a refund. Then buy a new cap from someone who use good packaging :thumbsup

HuliganRS · 08-22-2011, 07:06 PM

Quote:

Originally Posted by Tretov

If this is a cheap 1980s EM visor, you can glue the visor back in place. If not, you could re-stitch using a thin needle and re-sew using the small holes that used to hold the visor, and add some glue if needed. Depends on the cap.

To restore the circular shape of the base, place it onto a upside-down bowl or even better a mannequin head. Then leave it like that for a while.

Complain to the seller and ask for a refund. Then buy a new cap from someone who use good packaging :thumbsup

Sadly, it's a 1950's/60's EM visor hat.

I'll contact the seller and see what he wants to do...

Thank you!

Tretov · 08-22-2011, 07:26 PM

I'd try to re-stitch it without any glue.

Jeffrey Meffert · 08-22-2011, 09:16 PM

I have been amazed how resilient these uniform items are sometimes after being packed into a soft package wad and sent from overseas and still coming out intact. Sorry this one didn't make it intact

Will · 08-23-2011, 07:46 AM

On the internet you can purchase an adjustable hat stretcher for less than $20.
I have used them with excellent results on hats that have become misshapen over time due to poor storage or even shipping. Obviously you do not intend to stretch the hat!

I place the instrument inside if the cap, and adjust it until the tension is sufficient to restore the cap to it's original shape. Then I place it on a stack of books so that the visor is not taking the weight of the cap. After a week, remove the stretcher. If it hasn't fully corrected itself, re-insert the instrument and give it a little longer.

I have been extremely pleased with the results I have attained.

08-22-2011, 06:34 PM	#1
HuliganRS Senior Member Join Date: Nov 2002 Location: Illinois - U.S.A. Age: 46 Posts: 1,023	Fixing a visor hat I just received a hat from across the pond and the hat is deformed as well as the stitching is missing on one of the sides of the visor. Any suggestions as to how it can be fixed? Thank you, Rusty __________________ "Be civil to all, sociable to many, familiar with few, friend to one, enemy to none." Benjamin Franklin ------------------------------------------------------------------------------------------------------- Member #193

08-22-2011, 06:35 PM	#2
Jeffrey Meffert Senior Member Join Date: Apr 2006 Location: San Antonio, Texas, USA Age: 68 Posts: 640	Re: Fixing a visor hat Picture?

08-22-2011, 06:38 PM	#4
Tretov Senior Member Join Date: Jun 2003 Location: Republic of Finland Posts: 1,129	Re: Fixing a visor hat If this is a cheap 1980s EM visor, you can glue the visor back in place. If not, you could re-stitch using a thin needle and re-sew using the small holes that used to hold the visor, and add some glue if needed. Depends on the cap. To restore the circular shape of the base, place it onto a upside-down bowl or even better a mannequin head. Then leave it like that for a while. Complain to the seller and ask for a refund. Then buy a new cap from someone who use good packaging :thumbsup

08-22-2011, 07:26 PM	#6
Tretov Senior Member Join Date: Jun 2003 Location: Republic of Finland Posts: 1,129	Re: Fixing a visor hat I'd try to re-stitch it without any glue.

08-22-2011, 09:16 PM	#7
Jeffrey Meffert Senior Member Join Date: Apr 2006 Location: San Antonio, Texas, USA Age: 68 Posts: 640	Re: Fixing a visor hat I have been amazed how resilient these uniform items are sometimes after being packed into a soft package wad and sent from overseas and still coming out intact. Sorry this one didn't make it intact

08-23-2011, 07:46 AM	#8
Will Senior Member Join Date: Jun 2009 Posts: 236	Re: Fixing a visor hat On the internet you can purchase an adjustable hat stretcher for less than $20. I have used them with excellent results on hats that have become misshapen over time due to poor storage or even shipping. Obviously you do not intend to stretch the hat! I place the instrument inside if the cap, and adjust it until the tension is sufficient to restore the cap to it's original shape. Then I place it on a stack of books so that the visor is not taking the weight of the cap. After a week, remove the stretcher. If it hasn't fully corrected itself, re-insert the instrument and give it a little longer. I have been extremely pleased with the results I have attained.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KGB Visor 1989	Commissar	Soviet Uniforms, Hats And Insignia	10	10-06-2009 12:04 AM
New visor	ekclete	Soviet Uniforms, Hats And Insignia	9	03-18-2008 04:12 PM
Air force visor hat	krasno1935	Unsold Soviet Uniform Miscellanea Archive	0	08-06-2007 01:42 AM
Visor cap question	Tretov	Russian Federation Uniforms	6	06-28-2007 03:07 PM
old visor cap	Bazanov	Air Force Uniforms And Insignia	2	08-19-2003 09:23 AM