04-03-2007, 06:28 PM
He puts the sash on first and then pins/screws on the medals which wiill partially go through the sash. Now for the belt, on larger suspensions, If it is pin back, there is this "thing" that secures the pin in the middle in addition to both ends. The pin must be poked into the uniform, out to attach to the "thing", in again, and out again to attach to the end of the pin. Now, the area between when poked out the first time and in the second time there is a small gap between the bar and the uniform. In that gap, you can pass the shoulder strap through. Screwbacks are a lot easier to do this. I know it is very confusing but it is very much possible.
